960rpm 1TPH Spiral Elevator Conveyor , Vibrating Spiral Elevator

Vibrating Spiral Elevator Vertical Vibrating Elevator Vertical Vibrating Spiral Elevator Conveyor

ZC series vibration spiral elevator for plastic or food industry adopts vibrating motor as the vibration source and utilizes the synthetic amplitude of the two vibration motors to convey the material along screw trough.
ZC vibration spiral elevator for food industry is mainly used to lift the granular, powdery and block materials. it can also cool the materials while elevating.
The vibration feeder has the features of simple structure, easy maintenance, quantitative output of materials and continuously adjustable conveying amount, which can be used to vertical convey the granular materials in all industries

working principle:

The vibration motor of the driving device of the ZC series vertical hoist is installed at the lower part of the conveying tower. Two vibration motors are installed symmetrically and crosswise. The conveying tower is composed of a pipe body and a spiral conveying groove welded around the pipe body. The conveying tower is seated on a vibration damping device. The damping device is composed of a base and a vibration isolation spring. When the vertical hoist is working, according to the principle of self-synchronization of dual vibration motors, the vibration motor generates the exciting force, which forces the entire conveyor tower to perform horizontal circular motion and upward vertical motion spatial compound vibration, and the material in the spiral groove is affected by the conveying groove. The function is to make a uniform throwing circular motion and move upward along the conveying trough to complete the upward (or downward) conveying operation of the material. Therefore, this equipment is also called a vibrating vertical conveyor.

Four, model description:

Z C--□

┬ ┬ ┬

│ │ │

│ │ │

│ | │

│ │ └────────Conveying height (m)

│ └───────────- Vertical conveying

└───────────── Vibration motor

1. The basic type (ZC---port), which is an open conveying trough structure, is used for upward (or downward) conveying of a stream of materials without special requirements.

2. The closed type (ZC--port F) is a closed conveying trough structure, which is used for upward (or downward) conveying operations where materials are required to be dustproof.

Note: 1. The transportation volume is calculated based on the bulk density of the material 1t/m3, and the transportation height is the maximum value;

2. The motor power is calculated according to the maximum conveying height;

3. Special design and on-site design can be made according to the requirements of the meeting.